What it is?
Fulfilled by our friends at ACOPOWER đăWide ApplicationăHigh current 200Amp Battery Isolator, Universal application 12VÂ batterie With this Battery Starter Controller, no worries of engine cannot be started when original battery out of power, by pressing the emergency button to turn on the sub battery to start the engine. Easy to install,
đăWide ApplicationăDesigned with Small Size, Can Fit Anywhere!/ Wide Use on a variety of vehicles--12VÂ Jeep, Trucks, ATVs, UTVs, Boats, RVs, Vans, Off-road Vehicle, Caravan & Camping Applications.
đăFunctionă12V/200A Â Dual Battery Smart Isolator is a primary battery saver, which used to combine two batteries when an alternator is charging (engine running) and isolate them when not charging (engine off) so you can still start your vehicle.
đ ăInstallation Readyă Dual battery isolation protection controller, which automatically detects and identifies the system voltage after the isolator is powered on.Automatically Connection Voltage (Delay 5 seconds) : 13.5V-16V(12V working voltage)/ Automatically Disconnect Voltage (Delay 5 seconds) : 12.5V,disconnect immediately if it is below 12.5 V.
đ ăCUSTOMER SERVICEăCalifornia, USA based company in 11+ years  Free technical support, customer service; Reliable & trustable local business. 24/7 Free Technical Support Service, 100% Customer Satisfaction Service
WHY NEED THE ISOLATOR
Off-roader/caravan vehicle usually need to be equipped with a second battery to meet the demand for electrical appliances in the car. However, the second battery cannot be directly connected in parallel with the original car battery.
The stalling use of electricity may cause the original car battery to lose power and it is difficult to start the vehicle. On the other hand, the line load is too heavy when the two batteries charging together. Therefore, a battery isolator is required.
HOW TO WORKS
The battery isolator, also known as a split charge relay, uses your vehicle's power to charge an auxiliary battery and blocks your starting battery from getting drained by your equipment when the engine is turned off. The auxiliary battery isolator will only allow the extra battery to charge at whatever rate the alternator can manage.
Specifications:
Input Voltage: 12Vworking voltage and load voltage Continuous Current: 200A normally Automatic Connection Voltage: 13.5V-16V (12V working) Automatic Disconnection Voltage: 12.5V, immediately disconnect if below 12.5V Over Voltage: 16V Weight: 694g Size: 15.2*14.7*4cm /6*5.8*1.6inch Note: Please do not put the product under the water situation. Package List: Battery isolator 200A Fuse
Key Benefits
- Wide Application: High current 200Amp battery isolator, universal for 12V batteriesEnables engine start from a secondary battery if the primary battery is drained
- Includes an emergency button to activate the sub-battery for starting the engine
- Easy to install
- Compact Design: Small size allows installation anywhere
- Compatible with various 12V vehicles, including Jeeps, trucks, ATVs, UTVs, boats, RVs, vans, off-road vehicles, caravans, and camping applications
- Function: 12V/200A dual battery smart isolator protects the primary batteryCombines two batteries when the alternator is charging (engine running)
- Isolates batteries when not charging (engine off) to ensure vehicle startup capability
- Installation Ready: Dual battery isolation controller automatically detects system voltageAuto connection voltage (5-second delay): 13.5V-16V (12V working voltage)
- Auto disconnect voltage (5-second delay): 12.5V, disconnects immediately below 12.5V
What else you need to know
Why Need the Isolator:
- Off-road and caravan vehicles require a second battery for electrical demands
- Direct parallel connection with the primary battery may cause power drain
- Battery isolator prevents power loss and protects line load when both batteries charge
How It Works:
- The battery isolator (split charge relay) charges an auxiliary battery using the vehicle's power
- Prevents the starting battery from draining due to equipment when the engine is off
- The auxiliary battery charges at a rate managed by the alternator
Specifications:
- Input Voltage: 12V working voltage and load voltage
- Continuous Current: 200A normally
- Automatic Connection Voltage: 13.5V-16V (12V working)
- Automatic Disconnection Voltage: 12.5V, immediately disconnects if below 12.5V
- Over Voltage Protection: 16V
- Weight: 694g
- Size: 15.2 x 14.7 x 4 cm (6 x 5.8 x 1.6 inches)
- Note: Do not submerge the product in water
- Package Includes:Battery isolator
- 200A fuse
