Setting the beam set into place. Used the rope cantilever system off of the temporary beam to get it up off the ground and close to where it needed to be. Then ended up using a total of four floor jacks to maneuver it and set it in the place. Beam is roughly 400 pounds and two of us were able to do it. The beam is 21‘2“ long and is made out of two 2 x 12 with a half inch pressure treated plywood sandwiched in between. #FYP #Flip #Flippers #Construction #InteriorDesign #DIY #Viral #GeneralContractor #FortMyers #FortMyersBeach #Florida #HomeAndGarden #Design